Icom IC-905 Advanced Manual page 210

15
UPDATING THE FIRMWARE
General
D Preparation
Access the following URL and download the firmware file.
https://www.icomjapan.com/support/
L These instructions are based on Microsoft
1� Click the "Firmware/Software" link.
2� Enter "IC-905" into the Search box, and then click
[Search].
3� Click the desired firmware file link.
4� Carefully read "Regarding this Download Service."
Click "Agree," and then click [Download].
5� Click "Save as" in the displayed File Download
dialog�
6� Select the location where you want to save the
® Windows ® 10�
Click
1Enter
2Click
D Unzipping the firmware folder
1� Right-click the downloaded firmware folder (zip
2� Click "Extract All..."
1Click
2Click
Click
15-3
firmware, and then click [Save] in the displayed
File Download dialog.
• The file starts downloading.
• The firmware data is compressed in a "zip" format
folder. Unzip it before use.
format).
• The right-click menu is displayed.
• After unzipping, a folder is created in the same
location as the downloaded folder.
L In the "905*" folder, "905*.dat" is created.
* Represents the release number.
Click
Click