Icom IC-905 Advanced Manual page 149

11
D-STAR OPERATION (ADVANCED)
Automatic DV detection
If you receive an FM signal while in the DV mode, the
"DV" and "FM" icons alternately blink to indicate the
received signal is FM
When the DV Auto Detect function is ON, the
transceiver automatically selects the FM mode to
temporarily monitor the signal (Default: OFF)
L Regardless of this setting, the "DV" and "FM" icons
alternately blink if you receive an FM signal while in the
DV mode
NOTE: When Digital Call Sign squelch (DSQL)
or Digital Code squelch (CSQL) is selected, the
transceiver does not receive FM signals, even if this
function is ON You can silently wait for calls from
others
When an FM signal is received while in the DV mode
DV Auto Detect function: OFF
The "DV" and "FM" icons alternately blink, but the
audio cannot be heard
The icons
alternately blink
...
You cannot hear
the audio
11-17
1 Open the "DV Auto Detect" screen
» SET > DV/DD Set > DV Auto Detect
2 Touch "ON"
3 To close the DV/DD SET screen, push
several times
L When an FM signal is received while in the DV mode,
the "DV" and "FM" icons sequentially blink, and the
transceiver receives the signal in the FM mode
DV Auto Detect function: ON
The "DV" and "FM" icons alternately blink, and the
audio can be heard
The icons
alternately blink
Thanks for
the nice QSO!
You can hear
the audio!