Icom IC-905 Advanced Manual page 190

12
ABOUT THE DV GATEWAY FUNCTION
Access Point mode operation
D Making a Gateway call through the Access Point transceiver
When not using the DR function (Continued)
Step 5. Set the frequency offset
1� Push [MENU]�
2� Select "DUP/TONE����"
3� Select "Offset Freq�"
4� Set to "0�000�00�"
5� Push [MENU]�
• Returns to the standby screen�
Step 6. Set "UR" to the destination station call
sign
1� Hold down [CS] for 1 second to enter the
Operating Call Sign Select mode�
2� Select "UR�"
3� Set the destination repeater or destination
station's call sign�
L In the Access Point mode, you can select the
"CQCQCQ" but cannot make a call�
4� Push [MENU]�
• Returns to the standby screen�
Step 7. Hold down [PTT] to transmit
1� Hold down [PTT] to transmit�
2� Release [PTT] to receive�
L If you do not receive a reply, see page 12-25 for tips
on how to solve the problem�
TIP: When the settings are saved into a memory
channel, you can quickly select them� Read the
Remote D-STAR transceiver's instruction manual for
details�
12-21