Icom IC-905 Advanced Manual page 160

11
D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
D Entering new information into the repeater list
Step 14. Selecting the repeater tone frequency
L This item is displayed when Step 2. Selecting the
communication type is set to "FM Repeater" or "FM
Simplex"
L This setting is required when Step 13. Setting the tone
is set to "TONE" or "TSQL"
1 Touch "REPEATER TONE"
2 Set the repeater tone frequency
3 Push 
Step 15. Selecting the position data accuracy level
L When the Near Repeater Search function is not used, or
the distance between your position and a repeater is not
needed, select "None," and go to Step 18. Setting the
UTC offset
1 Touch "POSITION"
2 Touch the position data accuracy level
• None: Select when the repeater has no
position data
• Approximate: Select when the entered position data
is approximately correct
• Exact: Select when the entered position data
is exactly correct
Step 16. Entering the latitude
L This item is displayed only when Step 15. Selecting the
position data accuracy level is set to "Approximate" or
"Exact"
1 Touch "LATITUDE"
2 Enter the latitude
L Touching [N/S] selects a north latitude (N) or a south
latitude (S)
3 After entering, touch [ENT]
Step 17. Entering the longitude
L This item is displayed only when Step 15. Selecting the
position data accuracy level is set to "Approximate" or
"Exact"
1 Touch "LONGITUDE"
2 Enter the longitude
L Touching [E/W] selects an east longitude (E) or a
west longitude (W)
3 After entering, touch [ENT]
Step 18. Setting the UTC offset
L Universal Time Coordinated (UTC) offset is the time
difference between UTC and repeater local time. This is
a useful function to know the local time of the destination
repeater before you make a call
1 Touch "UTC OFFSET"
2 Set the time difference between UTC and the
local time
3 Push 
Step 19. Saving the repeater list
1 Touch "<<Add Write>>"
• The confirmation dialog is displayed.
2 Touch [YES]
• The entered contents are saved in the repeater list,
and the display returns to the selected repeater group
screen
TIP: How to cancel the entered data
1 Push 
• The confirmation dialog is displayed.
2 Touch [YES]
• Cancels the entry and returns to the selected
repeater group screen
11-28