Icom IC-905 Advanced Manual page 142

11
D-STAR OPERATION (ADVANCED)
"TO" (Destination) setting
D Directly entering (UR)
The destination station call sign can be directly
entered
Example: Directly entering the call sign "JM1ZLK"
1 Touch "TO" to select, and then touch "TO" again
2 Touch "Direct Input (UR)"
• Displays the DIRECT INPUT (UR) screen
3 Enter the station's call sign of up to 8 characters,
including spaces
4 After entering, touch [ENT]
• Returns to the DR screen, and the entered call sign is
displayed in "TO"
L After entry, you can edit the call sign in the DIRECT
INPUT (UR) screen
L The entered call sign remains on the DIRECT INPUT
(UR) screen, until you enter a new call sign
TIP: If the entered call sign has a duplicate in the
"Your Call Sign" memory, the name is displayed
(Only when the name has been entered)
D Directly entering (RPT)
The destination repeater call sign can be directly
entered
NOTE: BE SURE to include the node letter as the
8th digit See page 10-6 "IMPORTANT!" about the
node letters
Example: Directly entering the call sign "JP3YDH A"
1 Touch "TO" to select, and then touch "TO" again
2 Touch "Direct Input (RPT)"
• Displays the DIRECT INPUT (RPT) screen
3 Enter a repeater call sign of up to 8 characters,
including spaces (Example: JP3YDH A)
• Returns to the DR screen, and the selected repeater
name is displayed in "TO"
L After entry, you can edit the call sign in the DIRECT
INPUT (RPT) screen
L The entered call sign remains on the DIRECT INPUT
(RPT) screen, until you enter a new call sign
TIP:
• If the entered call sign has a duplicate in the repeater
list, the name is displayed
(Only when the name has been entered)
• When directly entering the repeater call sign, including a
"/" at the beginning is also correct
11-10