Icom IC-905 Advanced Manual page 181

12
ABOUT THE DV GATEWAY FUNCTION
Setting up the device
D When using the Internal Gateway function
Allowed Call Sign (Access Point Mode)
Selects to use the call sign restriction for the Access
Point mode� When "Enabled" is selected, this allows
only stations with registered call signs to transmit
through the Internet�
• Disable: Allows all call signs to transmit�
• Enable: Allows only the call sign entered on the
"Allowed Call sign List" to transmit�
L When using the Terminal mode, select "Disabled�"
Allowed Call Sign List
Enter the call sign of the stations that you allow
to transmit through the Internet while "Enabled" is
selected for "Allowed Call sign (Access Point Mode)�"
L You can add up to 30 call signs�
Adding a call sign
1� Touch for 1 second�
2� Touch "Add�"
3� Enter the Call sign, and then touch [ENT]�
(Default: Disable)
12-12
Deleting a call sign
1� Touch the Call sign for 1 second�
2� Touch "Delete�"
3� Touch [YES]�