7.7
Vibration acting on the entire body
When the machine is used properly, the weighted effective acceleration values at the
driver's seat of a
7.8
Vibrations acting on hands and arms
When the machine is used properly, the weighted effective acceleration values at the
driver's seat of a
7.9
Electromagnetic compatibility (EMC)
The following limit values are observed according to the stipulations of the EMC di-
rective 2004/108 CE:
- Interference emission according to DIN EN 13309:
< 35 dB μV/m for frequencies of 30 MHz - 1 GHz measured at a distance of 10 m
< 45 db μV/m for frequencies of 30 MHz - 1 GHz measured at a distance of 10 m
- Interference immunity against electrostatic discharge according to DIN EN 13309
CE (ESD):
The paver finisher did not show any discernible reactions to contact discharges of
± 4 KV and to air discharges of ± 4 KV.
The modifications according to test criterion „A" are being met, i.e. the paver finish-
er continues to work without malfunction during the test.
Electrical or electronic components and their arrangement may only be modified after
A
written approval by the manufacturer has been obtained.
2
= 0.5 m/s
according to DIN EN 1032 are not exceeded.
w
2
= 2.5 m/s
according to DIN EN ISO 20643 are not exceeded.
w
B 39