Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 143

Item Designation
Fill vehicle for
67
paving process
Set-up mode/
68
cleaning mode (o)
Brief description
Detent switch function and LED feedback:
- Filling function for the paving process.
The diesel engine's speed is increased to the preselected
nominal speed and all conveying functions set to "Auto-
matic" (conveyor and auger) are engaged.
The main function switch must be set to the OFF position.
A
- Switch OFF by pressing the button again or by swiv-
elling the drive lever out to the paving position.
- On reaching the adjusted material height (material sen-
sor), the filling function is automatically switched off.
On actuation, heed danger zones of moving parts of
f
the vehicle!
Detent switch function and LED feedback:
- Set-up mode:
When the vehicle is stationary, this function enables
all operating functions, which are only activated when
the drive lever is swivelled out (vehicle driving), to be
started up.
The main function switch must be set to the OFF position.
A
The engine speed is increased to the preselected nom-
A
inal value.
- Cleaning mode:
After finishing work, this function improves the clean-
ing of the conveying and compacting elements at re-
duced speed:
- Set either auger, conveyor or tamper to "Auto".
- Press button for min. 2 sec. - LED flashes
- Press button again to end cleaning mode.
D 11 49