Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 99

Item Designation
Emergency stop
10
button
11 Ignition lock
12 Starter
Brief description
Press in an emergency (danger to persons, impending colli-
sion, etc.)!
- Pressing the emergency stop button switches off the en-
gine, the drives and the steering system.
Making way, lifting the screed or other actions are then no
longer possible! Danger of accidents!
- The emergency stop button does not shut off the gas heat-
er system (o).
Close the main shut-off valve and the valves on the bottles
by hand!
- To restart the engine, the button must be pulled out again.
To activate the ignition voltage by turning the key.
- Switch off by turning the key back to its starting position.
After activating the ignition voltage, the input and display
A
terminal requires a few seconds for the booting process.
On shutting off the vehicle, first switch off the ignition,
A
then deactivate the main switch.
Before the main battery switch is deactivated, a period
A
of at least 100 seconds must elapse after switching off
the vehicle.
On actuation, the starter is in operation.
All emergency stop buttons (on the operating panel and the
remote controls) must be pulled out.
D 11 5