Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 271

Operating panel
The operating panel can be adjusted to the various operating positions: left/right, sit-
ting/standing. The entire operating panel can be swivelled for operation beyond the
outer edge of the vehicle.
m Make sure it is latched properly!
f Only adjust the operating position whilst the vehicle is stationary!
Pushing the operating panel:
- Release panel latch (2) and slide panel console to the desired position using the
handle (3).
- Insert panel latch (2) into one of the detent positions (4).
Swivelling the operating panel:
- Lift latch (5), swivel operating panel to the required position using the handle (3)
and allow latch to engage again in one of the intended detent positions.
Raise/lower the operating panel:
- Release clamping lever (6), lift or lower operating panel.
Tighten clamping lever (6) in required position.
Operating panel, linear adjustment:
- Press latch (7), move operating panel to foremost or rearmost position and allow
latch to engage again.
D 30 7