Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 582

2 Operating substance specifications
2.1 Drive engine TIER 4i, 4F / Stage IIIb, IV (o)- fuel specification
m Low-sulphur diesel fuel is prescribed for correct operation of the exhaust-gas treat-
ment system!
The maximum sulphur level must not exceed 15 ppm!
If low-sulphur diesel fuel is not used, the prescribed exhaust values cannot be met
and damage will be caused to the engine and to the exhaust-gas treatment system!
Risk of explosion! Never mix diesel fuel with ethanol, petrol or alcohol!
f
m Diesel fuel contaminated with water or dirt can cause serious damage to the fuel sys-
tem! Keep fuel and fuel system free of water and impurities!
m Observe the instructions for fuel recommendations and the specification in the main-
tenance instructions of the engine manufacturer!
2.2 Drive engine - Lube oil
Dynapac
Engine Oil
200
(*)
(*) = recommended
A
m Observe the instructions for lubricant recommendations and the specification in the
maintenance instructions of the engine manufacturer!
2.3 Cooling system
Dynapac AGIP
Coolant
-Antifreeze
200
Spezial
(*)
(*) = recommended
A
F 114 4
Esso /
Aral BP
Exxon
Chevron
Extended
Life Coolant
Fuchs Mobil Shell
Petronas
Antifreeze
G12
Finke
Aviaticon
Finkofreeze
P12+