Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 327

Driving and stopping the paver finisher
- Set the Fast/Slow switch (33) to "Hare".
- Set the preselector (15) to mark 10.
- For driving, carefully tilt the drive lever (13) forward or backward according to the
drive direction desired.
- Adjust the speed with the preselector (15).
- Carry out steering movements by actuating the steering potentiometer (16).
f In case of an emergency, press the emergency stop button (10)!
- To stop, set the preselector (15) to "0" and move the drive lever (13) into its
centre position.
D 41 19