Table of Contents
Advertisement
7.3
Vibration acting on the entire body
When the vehicle is used properly, the weighted effective acceleration values at the
driver's seat of a
7.4
Vibrations acting on hands and arms
When the vehicle is used properly, the weighted effective acceleration values at the
driver's seat of a
7.5
Electromagnetic compatibility (EMC)
The following limit values are observed according to the protection requirements of
the EMC Directive 2004/108/EC:
- Interference emission according to DIN EN 13309:
< 35 dB μV/m for frequencies of 30 MHz - 1GHz measured at a distance of 10 m
< 45 db μV/m for frequencies of 30 MHz - 1 GHz measured at a distance of 10 m
- Interference immunity against electrostatic discharge (ESD) according
to DIN EN 13309:
The paver finisher did not show any discernible reactions to contact discharges of
± 4 KV and to air discharges of ± 4 KV.
The modifications according to test criterion "A" are being met, i.e. the paver finish-
er continues to work without malfunction during the test.
Electrical or electronic components and their arrangement may only be modified after
written approval has been obtained from the manufacturer.
2
= 0.5 m/s
according to DIN EN 1032 are not exceeded.
w
2
= 2.5 m/s
according to DIN EN ISO 20643 are not exceeded.
hw
B 33
Advertisement
Table of Contents
