Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 406

Load securing - bucket
The following instructions for securing the bucket for transport on the low-bed trailer
A
consist merely in examples of how to secure the load correctly.
Always comply with the local regulations for securing the load and for correct use of
A
load securing equipment.
Normal driving mode also includes emergency braking, evasive manoeuvres and
A
poor road surfaces.
Use should be made of the different methods available for securing loads (positive
A
fit, force connection, diagonal lashing, etc.) in accordance with the specific
transport vehicle.
m The low-loader must have the necessary number of lashing points with a lashing
strength of LC 5,000 daN.
m The total height and total width must not exceed the maximum permissible dimensions.
m The ends of lashing chains and straps must be secured to prevent them working
loose and falling down unintentionally!
m Clean bucket before loading, remove material residues.
Prepare the low loader
m The floor of the loading space must always be undamaged, free of oil and mud, dry
(residual moisture is permitted without accumulations of water) and swept clean!
E 10 56