- Introduce the filter side into the tank
opening as shown.
- Gradually introduce the whole unit I into
the tank opening, using due caution.
Do not push the parts with force directly
m
into the tank opening. This will cause
damage!
- Position the head in the required align-
ment.
Ensure that the two noses (I) at the
flange of the filter head fit in the corre-
sponding recesses at the tank!
Press on the top until the head fits
completely in the tank opening.
- Place the retaining ring (E) over the fil-
ter head.
F 54 28
I
E