Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 372

3.5 Material shaft, hinged
To close the gap between auger box and
side board of the screen, hinged
material shafts can be fitted to both sides
of the auger.
The hinged material shafts swivel up
A
due to the material pressure which is
exerted and swivel in due to screed
retraction.
- Mount the left/right material shafts on
the auger box with the relevant
assembly parts (1).
If a terminal bearing is mounted for the
A
existing auger width, the adapter plate
(2) also has to be fitted.
- Fit the plate (3) to the hinge (5) using
the hinge rod (4).
The hinged material shaft can be
A
secured with the assembly parts (6) in
swivelled in position when transporting
the machine in its basic width.
The assembly parts (6) can be kept at
A
the hole (7).
E 10 22
2
1
7
4
5
3
6