- (4) "Joint hopper actuation" function
- Both hopper halves are actuated together with one of the hopper function switch-
es (open hopper / close hopper).
- (5) "Automatic steering unit" function
- The vehicle is steered automatically via corresponding sensing along a reference
(e.g. cable).
When the automatic steering unit is activated, the steering potentiometer is deactivated.
m
If the driver carries out a steering movement, this overrides the automatic steering
A
unit due to safety reasons.
- (6) Save function "Set Assist"
- The working condition / current position of the corresponding functions and com-
ponents is saved for later use.
As confirmation, the display changes for 5 to 10 seconds
A
during saving.
The functions and elements for the "Set Assist" function
A
are selected in the corresponding menu.
The "Set Assist" function prepares the paver to relocate to another section of road-
A
works or for transportation.
When the function is activated, previously selected vehicle functions are carried out
to make the vehicle ready for transport.
The function can be reset after relocating the paver.
This restores the corresponding elements to the previous working condition /position.
D 22 13