Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 88

1
Four lifting eyes (1, 2) are provided for loading the vehicle with a crane.
A
Depending on the type of screed which is used, the paver finisher's centre of gravity,
A
with the screed mounted, is located in the area of the drive unit's rear reversing roller (3).
- Secure vehicle wherever it is parked up.
- Engage the transport safeguards.
- Remove any attachments and extension parts from the paver finisher and the
screed until the basic width has been attained.
- Take off all protruding or loose parts and the gas bottles of the screed heater (see
chapters E and D).
- Lower the protective roof:
C 11 20
3
2