Fayat Group Dynapac SD2500C Operation & Maintenance Manual page 290

Separator fluid spraying system (o)
Used to spray the parts coming into con-
tact with asphalt with a separator emul-
sion.
- Connect the spray hose (1) with quick-
action coupling (2).
m Only switch on the spraying system
when the diesel engine is running; other-
wise, the battery will be discharged.
Switch off after use.
A permanently installed hose package
A
(3) for the spraying system is available
as an option.
- Pull the hose out of the device until a
click is audible. When released, the
hose automatically engages here. The
hose is automatically retracted into the
guide after pulling and discharging
again.
- Actuate button (4) to activate and de-
activate the pump.
- The indicator lamp (5) lights up when
the emulsion pump is running.
- Actuate the manual valve (6) to spray.
f Do not spray into open flame or on hot
surface! Danger of explosion!
The spraying system is fed by a canister
A
(7) at the vehicle step.
Refill the canister only while the vehicle
f
is stationary!
- If the system is not in use, place the
spray lance (8) in the provided holder
(9).
- If the spray hose is not in use, it can be
placed in its bracket (10).
D 30 26
10
2
8
9
1
3
8
9
6
7
4
5
6
9
7
4
5