Installing Seismic Hardware - Nortel 7400 Hardware Installation

370 Chapter 39 Hardware procedures

Installing seismic hardware

Procedure steps
NN10600-175 6.1S2
Install seismic hardware inside a seismic cabinet after you anchor the cabinet
to the floor.
1 Install the vertical mounting angles as shown in "Seismic cabinet
mounting—front view" (page 207).
2 Use the panel shown in "Seismic cabinet mounting—rear view"
(page 371) to connect the rear of the shelf to the additional seismic
cabinet mounting rail kit. The rear support panel hardware is contained in
the seismic shelf mounting collar kit.