Installing Fp Cables - Nortel 7400 Hardware Installation

Installing FP cables

Prerequisites
Multiservice Switch 7400 Hardware Installation, Maintenance, and Upgrade 6.1S2
Install FP cables after you have installed the function processor (FP) and any
related termination panel or panels.
WARNING
Risk of eye injury by laser
Never look directly into the end of a fiber cable, let an end
pass in front of your eyes, or use an optical device to look
at the end of an optical fiber unless you are certain the
other end is not connected. The LASER travelling through
a fiber cable can injure the human retina.
WARNUNG
Gefahr von Augenverletzungen durch Laserstrahlen
Blicken Sie nie direkt auf das Ende eines Glasfaserkabels,
und überprüfen Sie auch einzelne Faserenden nicht mit
einem optischen Gerät, wenn Sie nicht sicher sind, daß das
andere Kabelende nicht angeschlossen ist. Der über die
Glasfasern übertragene Laser kann die menschliche
Netzhaut verletzen.
WARNING
Risk of personal injury
Connect device interfaces to safety extra-low voltage
(SELV) circuits only. Connections to telephone network
voltage (TNV) circuits must be through an external device
that provides current protection and isolation, such as an
approved channel service unit (CSU). All such devices
must meet the equipment safety standards of the country
of installation.
Chapter 39 Hardware procedures 349