Nortel 7400 Hardware Installation page 433

Figure 162
Unanchoring a cabinet from a pallet
Multiservice Switch 7400 Hardware Installation, Maintenance, and Upgrade 6.1S2
"Unanchoring a cabinet from a pallet" (page 433) shows the top view of
the cabinet and a close-up of an anchor bracket.
4 Pivot the anchor brackets off the lag bolts and away from the four leveling
feet as shown in the figure. Ensure that the brackets are furthest from the
feet.
WARNING
Risk of personal injury
To prevent injury, when working around the cabinet,
especially to move it, ensure that no part of your hands or
feet is under the cabinet, and do not allow the leveling feet
to snag on an anchor bracket and tip the cabinet.
Chapter 39 Hardware procedures 433
PPT 0887 001 AA