Chapter 27
FP decommissioning
Prerequisites to FP decommissioning
FP decommissioning task flow
Multiservice Switch 7400 Hardware Installation, Maintenance, and Upgrade 6.1S2
Decommission a function processor (FP) if you want to install a different type
of FP in its slot, or if the slot is no longer being used.
•
"Prerequisites to FP decommissioning" (page 159)
•
"FP decommissioning task flow" (page 159)
•
Some of the procedures in this task are not located in this document.
Ensure that you have access to the required documents.
This task flow shows you the sequence of procedures you do to
decommission one or more FPs. To link to any procedure, go to "Task flow
navigation" (page 160).
159