4-port 10/100BaseT Ethernet FP
Notational conventions
Multiservice Switch 7400 Hardware Installation, Maintenance, and Upgrade 6.1S2
replacement, addition, or upgrade as indicated by the existing FP information
in this document. None of the sections involving FPs require a change for this
card.
The 4-port 10/100BaseT Ethernet FP with PEC NTNQ95 and software name
4pEth100BaseT is introduced for any Multiservice Switch 7400, including
the Multiservice Switch 7460. The 4pEth100BaseT FP is a low-cost, entry-
level alternative for customers who don't need the port capacity of the
8pEth100BaseT FP. On an Ethernet service and 'per port' basis, this FP offers
the same functionality as the 8pEth100BaseT FP. This FP is to be handled
during an installation, replacement, addition, or upgrade as indicated by the
existing FP information in this document. None of the sections involving FPs
require a change for this card.
The following are samples of caution and warning conventions used in this
document.
WARNING
This warning informs you of risk of personal injury.
WARNUNG
Warnhinweis für das Bestehen möglicher
Verletzungsgefahren.
WARNING
This warning informs you of risk of personal injury from
electrical shock.
About this document 31