202 Chapter 38 Termination or sparing panel replacement
Task flow navigation
NN10600-175 6.1S2
The following references are listed alphabetically:
•
"Installing a 13-inch termination panel on a Multiservice Switch 7420"
(page 235)
•
"Installing a 13-inch termination panel on a Multiservice Switch 7440"
(page 238)
•
"Installing a 19-inch rack-mounted termination panel" (page 240)
•
"Installing a Multiservice Switch cabinet door" (page 291)
•
"Installing FP cables" (page 349)
•
"Re-enabling an LP". See NN10600-550 Nortel Networks Multiservice
Switch 7400/15000/20000 Common Configuration Procedures.
•
"Removing a 13-inch termination panel from a Multiservice
Switch 7420" (page 406)
•
"Removing a 13-inch termination panel from a Multiservice
Switch 7440" (page 408)
•
"Removing a 19-inch rack-mounted termination panel" (page 410)
•
"Removing a cabinet door" (page 412)
•
"Switching between active and standby processor cards". See
NN10600-550 Nortel Networks Multiservice Switch 7400/15000/20000
Common Configuration Procedures.
•
"Temporarily disabling an LP". See NN10600-550 Nortel Networks
Multiservice Switch 7400/15000/20000 Common Configuration
Procedures.