Table of Contents
Advertisement
20
Table 7 LED State Indicators (continued)
LED
Application Switch 3000 Series
LED
Installing the Switch Hardware
This section describes how to install the Application Switch and connect cables to the network
ports, the management port, and the console port.
Package Contents
Caution: This Product contains a Lithium Battery. Batteries are not customer replaceable
parts. They may explode if mishandled. Do not dispose of the battery in fire. Do not
disassemble or recharge.
An Application Switch is shipped with the following items:
•
Two mounting brackets for a 19" rack or wall mounting.
•
Eight Phillips screws for installing the mounting brackets of the Nortel Application Switch
unit and twelve Phillips screws for installing the mounting brackets of the E and DC variants.
•
Unless otherwise specified by the customer, the AC powered Application Switch is shipped
with two AC power cords, one for North America and one for Europe.
listing of order numbers for regional power cords.
•
Console cable.
•
A documentation kit containing this Installation Guide, software manuals and a software CD
315396-F
State
On (Green)
Off
Blinking (Green)
Description
Link is Active
Link is Inactive
Data is being processed
Table 8
contains a
Hide quick links:
Advertisement
Table of Contents
