Adjustment Of Solenoids; Adjustment Of Transfer Drum Retract Solenoid - Minolta CF910 Service Manual

Hide thumbs Also See for CF910:

Table of Contents

ADJUSTMENT OF SOLENOIDS

Fig. 1 Transfer Drum Retract Solenoid Adjusting Procedure

1 mm or more

4. Transfer Drum

Retract Assy

2. Paper Take-Up

Supply Board

1. Loosen the adjusting screw.

2. Manually move the solenoid

into its energized position.

The clearance between pawl

and ratchet should be 2

±1 mm. At this time, allowing

"0" clearance between pawl

and ratchet, secure the

3. With the solenoid in the

deenergized position, turn

the ratchet.

4. With the clearance between

and ratchet "0" (i.e.,

the solenoid is in the deen-

ergized position), the clear-

ance between pawl

ratchet should be 1 mm or

Table of Contents