15-11. Removing the AIDC sensor (AIDC)
4131D015AA
15-12. Removing the high voltage unit (HV)
4131D016AA
4131D017AA
1. Remove the top-front cover, top cover, left-side
cover and the power unit.
2. While keeping away from the seal, remove the
AIDC sensor. (2 screws and 1 connector)
1. Open the right-side door.
2. Remove the top-front cover, top cover, rear cover,
left-side cover, controller protective cover and the
controller control board.
3. Remove the controller box. (7 screws)
4. Remove the high voltage unit (HV). (4 screws, 3
connectors and 2 holders)
88