Transfer Output - Minolta CF910 Service Manual

(4) Transfer Output

3. Check the test print for the following.
<Low T/C>
1144D242AA
<Low T/C>
If the entire image has a heavily brushed effect, select "Copying Status" of the "State
Confirm" function and press the Start key to check for the T/C of each color of toner.
1. Select A3 crosswise or 11" × 17" paper.
2. From the Service Mode select "Test
1154D085CA
<Poor Image Transfer>
1144D244AA
<Poor Image Transfer>
Entire image has a lightly
brushed effect with
uneven, irregular low
image density.
D-119
Print" and then select "Gradation Pat-
tern." Then, select "Belt Pattern Cyan"
and press the Start key.
<Excessive Image Transfer>
<Excessive Image Transfer>
Even, high image density
at the edges with lower
density inside.
1144D243AA