Paper Take-Up Roll Retracting Mechanism - Minolta CF910 Service Manual

1154SBM130503A

(3) Paper Take-Up Roll Retracting Mechanism

• The Paper Take-Up Roll is designed to retract while the drawer is being slid into or out of
the copier to prevent the paper from contacting the Paper Take-Up Roll during that time.
• The retracting mechanism consists of the spacer, Retracting Lever, and a torsion spring
located in the rear of the drawer. It operates as follows.
= When Drawer is in Position =
• The spacer pushes down the Retracting Lever, freeing the Paper Take-Up Roll.
= When Drawer is Being Slid out =
• When the drawer is slid out, the Paper Take-Up Roll shaft is raised up by the Retracting
Lever, retracting the Paper Take-Up Roll upward.
Spacer
Paper Take-Up Roll
Paper Take-Up Roll
Retracting Lever
1144M053AB
1144M054AB
M-76
Torsion Spring