Minolta CF910 Service Manual page 287

2. Left-Margin
This function is used after the PH has been replaced or when the reference positions of the
drawer and Multi Bypass Table deviate due to variations in size of paper.
3±1.5mm
12. If the specifications are not met, slide the
Transfer Unit into the copier and close the
Front Door.
13. Select "Image Start Position" and, using
the shift keys (
ting.
Adjustments
If the setting is longer, decrease it.
1154D111CA
If the setting is shorter, increase it.
14. Check the image start position again.
15. After the adjustments have been made,
touch "Ex.".
1. Access the "PRT Area" screen.
2. Select "Left-Margin" and then "Upper."
3. Press the Start key.
1154D093CA
4. Measure the width of the void image on
the test copy as shown on the left.
Specifications
Void Image Width: 3±1.5 mm
1144D238AA
D-126
or ), change the set-