Settings In The User Mode - Minolta CF910 Service Manual

4-4.

Settings in the User Mode

User Mode Key
Touch Panel Display
Default Settings
Meter Count
Admin. Mode
Job Memory Input Used to designate 10 most frequently used job settings.
User's Choice
Image Centering
Setting (the default setting is
Used to select the copying function settings established when the
copier is turned ON or panel is reset.
Current Settings
Note
To designate the "Current Settings," make the necessary settings
before using this function and then designate them using this func-
tion.
Used to display the total number of copies made in "Full Color &
Black" and "Monotone." The press of the Start key causes the Total
Counter data to be printed. At this time, the copier serial number is
also output.
Note
"Large" covers the size of paper set by the "Count Up Select" function
of "Setting" available from the Service mode.
- Copy Track Functions -
The number of copies made by up to 100 different accounts can be
controlled by defining a unique access number for each account.
- Gradation Adjust -
The press of the Start key lets the copier automatically adjust grada-
tion. (It is the same function as "Gradation Adjust" available from the
Service Mode.)
- User Help -
When the user sends a User Help code according to the status of the
copier fitted with the DT-103.
- Erase Mode -
You can choose the lost image width for the leading edge of the copy
"5mm", "8mm" and "Auto".
Copy
5
Print
5
The lost image is automatically switched between 5mm and 8mm
according to the copy mode settings made.
Used to customize the copier to fit the user's needs.
Used to select whether to enable or disable the function that automat-
ically shifts the image of the original towards the center of the copy
paper.
ON (enabled)
Factory Settings
8
8
OFF (disabled)
S-11
Highlighted )
Auto