Installing The Transfer Film - Minolta CF910 Service Manual

(14) Installing the Transfer Film

1. Fit the straight pins into the joint.
2. Peel off the backing from double-sided adhesive tape
3. Set the Transfer Film onto the straight pins.
4. Press the edge of the Transfer Film against the Drum all the way across its entire width,
starting with the double-sided adhesive tape
. During the procedure, try to eliminate any portion of the film edge that floats up off
A
the Drum.
5. Remove the straight pins from the joint.
A
C
A
D-91
to on the Transfer Film.
A
D
B end toward double-sided adhesive tape
B
D
1154D230AB
B
1154D231AA