Prt Area - Minolta CF910 Service Manual

Hide thumbs Also See for CF910:

Table of Contents

(7) PRT Area

1. Top-Margin

This function permits adjustments of the print start position (Image Start Position) on the

paper which is not affected by the image signal sent from the IR and the point at which the

paper is attracted onto the surface of the Transfer Drum (Lead Edge Position).

1. This adjustment should be made after Feed Motor Speed has been adjusted.

2. Lead Edge Position must be adjusted before Image Start Position is adjusted.

5. Slide out the Transfer Drum and measure the distance between the leading edge of the

paper attracted to the drum and the black line on the Transfer Film.

Specifications

Distance between the leading edge of the paper attracted to the Transfer Drum and the

black line on the Transfer Film: 0 ±0.5 mm

1. Select a drawer loaded with the largest

2. Access the "PRT Area" screen.

3. Select "Top-Margin" and then "Lead

4. After a misfeed message appears, open

Edge Position" and press the Start key.

the Front Door.

Table of Contents