Switches On Pwbs, Service Mode - Minolta CF910 Service Manual

4. Switches on PWBs, Service Mode

Manual Change List
PAGE
All pages "Touch Panel Display"
S-3, 4 Control Panel
S-5 Warning screens
S-7 Function Of Switches And Variable
Resistors On PWBs.
S-9 User Mode
S-11 Settings in the User Mode
S-17 Service Mode Screen
S-18 Admin. Mode, Org. Delete Sensor,
Editor Screen, Fuser Oil Change.
S-19 IR Area, ADF check
S-20 AE Adjust, CCD check
S-22 Admin Mode
S-24 Org. Detect Sensor
S-25 Editor Screen
S-26 "User Set" -> 10k Warning
S-29 IR Area
S-30 ADF check
S-33 AE Adjust
S-36 CCD check
S-37 ADF Ent, ADF Rev. (Life 2)
S-39 Trouble 4 (IR)
S-40 ADF
S-41 Warning 3 (IR)
S-43 AE Adjust, CCD check, IR Area,
Original Stop Position Set
S-45, 46 Security Mode
S-47 Developer Change Mode
S-50 Touch Panel Correction Mode
S-51 Date/Time Input Mode
OLD
-5-
S: Switches on PWBs/Service Mode
NEW
"PC screen Display".
Change to Operation Panel illust. See page 7
in this manual.
See replacement page 20.
Does not have Tech. Rep. Switches Board.
See replacement page 21.
Not applicable
Not applicable
Changed to "Serviceman Mode" of PC
screen.
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
See replacement page 22.
Not applicable
See replacement page 23.