Removal Of The Pc Unit - Minolta CF910 Service Manual

(2) Removal of the PC Unit

Remove the PC Unit after the Toner Hopper Unit has been removed, the Transfer Unit lever
has been unlocked and the Transfer Unit Cover Assy has been removed.
1. Developing Unit Cover
6. PC Unit
Fig. 1
4. PC Front Frame Assy
3. PC Drum Charge
Corona Assy
Fig. 1
While sliding the PC Unit into the
copier, swing the drum to the left to
avoid scratching it on a drum sensor.
2. Slide out and then push down the
Developing Unit Pressure Lever.
5. Drum Holder
Fig. 2
1154D291AA
D-10
1154D290AA
Fig. 2
At reinstallation, check that the Drum
Holder tabs fit into the slots. (If the
tabs do not fit in, turn the PC Holder.)
1144D008AB
1154D120AA