Feed Motor Speed - Minolta CF910 Service Manual

Hide thumbs Also See for CF910:

Table of Contents

(6) Feed Motor Speed

Normally: The amount of color overlay deviation between C and M is uniform throughout

the entire print area.

Faulty: 1. The amount of color overlay deviation between C and M varies from one point to

another on the image.

2. Especially from the point around 185 mm from the trailing edge of the paper, the

amount of color overlay deviation changes dramatically.

A particular paper source and type of paper must be used for each speed function as fol-

Select any of the drawers loaded with A3 lengthwise or 11" × 17" CF paper.

Place A4 lengthwise or 8-1/2" × 11" OHP transparencies on the Multi Bypass Table.

• Heavy Stock 2:

Place A3 lengthwise or 11" × 17" thick paper weighing 157 g/m² on the Multi Bypass

4. Using a loupe, measure the amount of color overlay deviation at the leading edge and

the center of the test copy fed out.

Specifications

The amount of color overlay deviation should be 0.5 dots (32 µm) at the leading edge and

1. Select the paper and paper source as

2. Select "Feed Motor Speed" and then

Do not select "D

3. Press the Start key.

select "CF Paper" and "C

Table of Contents