Control Panel Keys And Touch Panel; Control Panel Keys - Minolta CF910 Service Manual

2

CONTROL PANEL KEYS AND TOUCH PANEL

For more details, see the "Operator's Manual" shipped with the copier.
2-1.

Control Panel Keys

1. Touch Panel
• Shows various screens and messages.
2. Display Contrast Control Knob
• Varies the brightness of the Touch Panel.
3. Utility Key
• Changes the screen to the Utility Mode
setting screen.
4. Job Recall Key
• Selects the Job Recall screen which
allows the user to program a copying job
and to recall, check, or delete a job previ-
ously stored in memory.
5. Auto Color/Full Color/Black Key
• Auto Color:
When in this mode, the copier automati-
cally checks and determines whether the
original is in color or black-and-white and
makes the copy accordingly.
• Full Color:
When in this mode, the copier makes a
full-color copy even if the original is in
black-and-white.
• Black:
When in this mode, the copier makes a
black-and-white copy even if the original
is in color.
6. Start Key
• Starts a copy cycle.
7. Stop key
• Stops a copy cycle.
8. Clear Key
• Clears the number-of-copies setting,
zoom ratio, counter count.
9. Panel Reset Key
• Clears all control panel settings made
previously, initializing the copier.
Note
It does not, however, clear the settings
made immediately before the Interrupt
mode.
10. Interrupt Key
• Sets the copier into, or lets it leave, the
Interrupt mode.
11. Energy Saver Key
• Sets the copier into the Energy Saver
mode.
12. Access Mode Key
• When "Copy Track Functions" has been
turned "ON," entering the access number
and pressing this key (Access Mode) will
allow the user to make copies.
13. 10-Key Pad
• Numeric Keypad used for entering the
number of copies to be made, zoom ratio,
access number, and Service mode set-
tings.
14. Photo Mode Key
• Sets the copier into the Photo mode.
S-2