Adjustment Of Static Charge Roller Solenoid - Minolta CF910 Service Manual

Hide thumbs Also See for CF910:

Table of Contents

(2) Adjustment of Static Charge Roller Solenoid

Static Charge Roller

Fig. 1 Static Charge Roller Solenoid Adjusting Procedure

Solenoid Energized

Ratchet Tooth

2. Synchronizing/Static

Charge Roller Assy

Static Charge Roller Solenoid

Adjusting Screw

1. Loosen the adjusting screw.

2. Manually move the solenoid into

the energized position.

3. Secure the solenoid where the

pawl engages halfway or more

with a tooth, but is not in contact

with the flat portion of the

4. Deenergize the solenoid and

ensure that the tip of the pawl

does not contact the ratchet

1. Transfer Drum

Table of Contents