Administrator Mode - Minolta CF910 Service Manual

(1) Administrator Mode

Administrator Mode
Touch Panel Display
Admin. Mode
Copy Track
Functions
Access # Input
Counter Check <Check Procedure>
Counter Reset
Permission
Level
Setting (the default setting is
Entry of the "Administrator #" opens the following screens.
Note
The "Administrator #" is to be set by using the Tech. Rep. mode.
Select whether to keep track of the copy data for each account ("ON")
or not ("OFF"). When "ON" is selected, control of the following data
becomes possible.
ON Provides the copy track functions.
OFF Does not provide the copy track functions.
Program the access # for each account #.
Account # Using the
which the access # is to be programmed.
Access # can be programmed for up to 100
accounts
Access # Enter a 4-digit access # from the 10-Key Pad.
Note
A caution message appears on the Touch Panel if a new access # is
set for an account # for which another access # was previously pro-
grammed, or if an access # which already exists is defined. No
access # can be "0000."
1. Using the / keys, select the account # to check for the counter.
2. Select the desired function.
3. Place the required number of sheets A4 lengthwise paper on the
Multi Bypass Tray.
4. Press the Start key and the copier prints the counter list.
<Resetting Procedure>
1. Using the / keys, select the account # for which the counter is
to be reset.
2. Select the desired function.
3. Touch [Cancel] to reset the counter.
Select whether to "permit" or "prohibit" color copying and black copy-
ing, respectively.
<Procedure>
1. Using the / keys, select the account # for which the permis-
sion level is to be set.
2. Select whether to "permit" or "prohibit" color copying and black
copying, respectively.
/ keys, show the account # for
S-13
Highlighted
)