Jig Software Set-Up - Minolta CF910 Service Manual

JIG SOFTWARE START-UP
1. Load the Service Software CD into the CD
Drive of the Notebook PC. Copy the software
to the HDD.
2. Open Windows Explorer, click on the HDD
drive, double-click on the file "FACTE.exe". If
chains of small characters "DF" appear on
the PC screen, the connection is complete.
3. If the connection fails, click "Disconnect"
from among the "Action", click "Settings" in
the menu bar to open the communication
panel.
Check the following items:
PORT ...... Port of the Notebook PC to be
used
Baud ....... 19.2k
(Set the switcher to the "A" CF911P side).
4. Click "Connect" from among the "Action"
choices in the menu bar to start communica-
tion with the Notebook PC.
5. Select the printer adjustment mode from
among the "CF911P" choices in the menu
bar.
F1 ... Serviceman Mode
F3 ... Dev Mode
NOTE:
If the system hangs up during the above
operation, terminate "Windows" and restart
from step 1.
-10-
;only check.