(5) Jam Sensor
4. After the Transfer Drum has stopped, turn RT1 on the Failure Sensor Adj. Board clock-
wise until LED1 turns ON and then slowly counterclockwise until it turns OFF.
5. Turn RT2 on the Failure Sensor Adj. Board clockwise until LED2 turns ON and then
slowly counterclockwise until it turns OFF.
LED2
LED1
RT1
RT2
RT1, LED1, For Paper Attraction Detection Sensor 2
RT2, LED2, For Paper Attraction Detection Sensor 1
6. After the adjustments have been made, press the Stop key and touch "Ex.".
1. Open the Front Door, remove the
Transfer Drum Unit cover, and then
lock the Transfer Drum Unit back into
position.
2. Install the Interlock Switch Actuating
Jig.
3. Select "Jam Sensor" (from "Machine
Adjust") and press the Start key.
1144D284CA
D-121
1144D236AB