Nortel Meridian Mail User Manual page 42

Meridian Mail Reporter 2.0 User's Guide
6. Click the Logon password box, and then type your password.
The password must contain at least 6 and no more than 16 characters. You
require the password to log on to MMR, access configuration updates, and
run reports.
If you enter a password that does not meet MMR requirements, you are
prompted to try again. If you forget your password at any time, you can use
the installation program to reset your password. Instructions are included in
the online help and in this chapter.
7. Click Continue.
MMR Setup shows the Destination Drive screen, prompting you for the
destination drive and providing c: as the default drive.
Figure 3-3
Destination Drive screen
Note: The default directory is \REPORTER and cannot be changed.
8. If the default drive is inappropriate, from the Select Drive drop-down list,
select another drive.
9. Click Continue.
If an older version of MMR exists on the hard drive, the Older Release
screen appears, notifies you about the version, and prompts you to
upgrade.
3 - 6