Client Logging; Table 8 Client Error Messages - Nortel VPN Client User Manual

Appendix A

Client logging

Table 8

Table 8 Client error messages

Message
LOG_AUTH_FAILED
LOG_CLI_UNKNOWN
LOG_CONNLOST_ERROR
LOG_CONNLOST_KEEPALIVE
LOG_NO_PROPOSAL
LOG_REMOVE
LOG_RENAME
IDP_SOCKETS_INIT_FAILED
IDS_CANTOPENDHCP
IDS_CONNECTIONLOST
describes client error messages.
Description
Authentication failed. Check user
authentication parameters.
Command line detected unknown command.
Check command line launch parameters. See
Reference for the Contivity Secure IP Services
Gateway Command Line Interface for further
information.
Connection lost due to unknown error. See the
Contivity Secure IP Services Gateway log for
further information.
Contivity gateway did not respond to keep-
alives. Connection lost. Check connection to
the Contivity gateway and the dial-up
connection for failure.
Encryption mismatch.The 56-bit client is
attempting to connect to the Contivity gateway
configured as 3DES.
Unable to remove previous session log file.
Check for DOS file protection issue.
Unable to rename previous session log file.
Check for DOS file protection issue.
Windows socket initialization failed.
Failed to create a DHCP socket; connection will
be closed.
Secure connection has been lost; click Connect
to reestablish connection.
Configuring the Contivity VPN Client
85