Drive Info - gefran SIEIDrive ADL300 Functions Description And Parameters List

2 - DRIVE INFO

This menu displays the information for identifying and configuring the drive.
Menu PAR Description
2.1 476 Drive type
The drive series identification code is displayed.
The drives reporting 24V in the description can be feeded by an external 24Vdc power supply. For schematics and connec-
tion diagrams please refer to Quick Start manual.
0 Basic-Sin
1 Advanced
2 Basic-VGA
3 Basic-End
128 Basic-Sin 24V
129 Advanced 24V
130 Basic-VGA 24V
131 Basic-End 24V
Menu PAR Description
2.2 480 Control type
The control mode is displayed.
11
Asynchronous
12
Synchronous
Menu PAR Description
2.3 482 Drive size
The drive size identification code is displayed.
Menu PAR Description
2.4 484 Drive family
The available mains voltage is displayed (e.g. 400V). The undervoltage alarm refers to this voltage value.
The condition No power occurs when the regulation board has just left from production and has never been configured for
any power. The configuration adjustment for a given power is achieved by linking it to a power board and running a Save
parameters.
0 No Power
1 230V..480V
2 500V..575V
3 690V
4 230V
Menu PAR Description
2.5 486 Drive region
Setting of the geographical area in which the drive is to be used (Europe or USA). This setting determines the factory volt-
age and power supply frequency values.
0
EU
1
USA
Menu PAR Description
2.6 488 Drive cont current
The current that the drive can deliver continuously according to size, supply voltage and programmed switching frequency
is displayed.
Menu PAR Description
2.7 490 Firmware ver.rel
The version number and release number of the drive firmware are displayed. On the keypad these are displayed in the ver-
sion.release format. The parameter reading from the serial communication device or fieldbus returns the version in the high
byte and the release in the low byte.
10
UM Type FB BIT
ENUM
UM Type FB BIT
ENUM
UM Type FB BIT
UINT16
UM Type FB BIT
ENUM
UM Type FB BIT
ENUM
(400V / 50Hz)
(460 / 60 Hz)
UM Type FB BIT
A FLOAT
UM Type FB BIT
UINT16
ADL300 • Functions description and parameters list
Def Min
Basic-Sin 1
Def Min
Asynchronous 0
Def Min
0 0
Def Min
No Power 0
Def Min
EU 0
Def Min
CALCF 0.0
Def Min
0 0
Max Acc Mod
0 R FVS
Max Acc Mod
0 R FVS
Max Acc Mod
0 RS FVS
Max Acc Mod
0 RS FVS
Max Acc Mod
1 R FVS
Max Acc Mod
0.0 RZS FVS
Max Acc Mod
0 R FVS