gefran SIEIDrive ADL300 Functions Description And Parameters List page 104

4 Fast stop
Menu PAR Description
22.9 4524 MotorOT restart
Enabling of automatic restart after the motor overtemperature alarm MotorOT.
0 Disable
1 Enable
Menu PAR Description
22.10 4526 MotorOT restart time
Setting of the time within which the Motor Overtemperature alarm must be reset in order to perform automatic restart.
Menu PAR Description
22.11 4528 MotorOT holdoff
Setting of the delay between the signalling of the motor overtemperature alarm MotorOT and enabling of the alarm. If an
alarm condition occurs, the drive will wait for the set time before enabling the alarm. If the alarm is removed within the set
time, the drive will not indicate any alarm condition.
Menu PAR Description
22.12 4540 Overspeed threshold
Setting of the threshold above which the overspeed alarm Overspeed is enabled.
Menu PAR Description
22.13 4542 Overspeed activity
Setting of the behaviour of the drive in case of a motor overspeed alarm Overspeed. This alarm indicates that the motor
speed has exceeded the threshold set in the Speed ref top lim and Speed ref bottom lim parameters in the COM-
MANDS menu.
0
Ignore
1
Warning
2
Disable
3
Stop
4
Fast stop
Menu PAR Description
22.14 4544 Overspeed holdoff
Setting of the delay between the signalling of the motor overspeed alarm Overspeed and enabling of the alarm. If an alarm
condition occurs, the drive will wait for the set time before enabling the alarm. If the alarm is removed within the set time,
the drive will not indicate any alarm condition.
Menu PAR Description
22.15 4550 SpdRefLoss threshold
Setting of the threshold below which the speed reference loss alarm SpdRefLoss occurs .
Menu PAR Description
22.16 4552 SpdRefLoss activity
Setting of the behaviour of the drive in case of a speed reference loss alarm SpdRefLoss. This alarm indicates that the
difference between the speed regulator reference and the actual motor speed is more than 100 rpm.
0 Ignore
1 Warning
2 Disable
3 Stop
4 Fast stop
Menu PAR Description
22.17 4554 SpdRefLoss holdoff
The delay between the Speed ref loss alarm condition signal and activation of the actual alarm. If an alarm condition oc-
curs, the drive will wait for the set time before enabling the alarm. If the alarm is removed within the set time, the drive will
not indicate any alarm condition.
104
UM Type FB BIT
ENUM
UM Type FB BIT
ms UINT16
UM Type FB BIT
ms UINT16
UM Type FB BIT
rpm INT16 INT32
UM Type FB BIT
ENUM
UM Type FB BIT
ms UINT16
UM Type FB BIT
rpm INT16
UM Type FB BIT
ENUM
UM Type FB BIT
ms UINT16
ADL300 • Functions description and parameters list
Def Min
Disable 0
Def Min
1000 120
Def Min
1000 0
Def Min
CALCI 0
Def Min
Disable 0
Def Min
0 0
Def Min
100 0
Def Min
Warning 0
Def Min
1000 0
Max Acc Mod
1 RW FVS
Max Acc Mod
30000 RW FVS
Max Acc Mod
30000 RW FVS
Max Acc Mod
CALCI RW FVS
Max Acc Mod
4 RW FVS
Max Acc Mod
5000 RW FVS
Max Acc Mod
CALCI RW FVS
Max Acc Mod
4 RW FVS
Max Acc Mod
10000 RW FVS