gefran SIEIDrive ADL300 Functions Description And Parameters List page 17

Menu PAR Description
4.15 576 Display backlight
Enabling of the backlight on the drive display.
If set to 0 the display backlight will go off when the drive has been on for three minutes.
If set to 1 the backlight will stay on for as long as the drive is powered.
Menu PAR Description
4.16 578 Language select
Setting of the drive programming language.
0
English
1
Italian
2
French
3
German
4
Spanish
8 Turkish
Note!
The Load Default command (par. 580) does not modify this parameter.
Menu PAR Description
4.17 580 Load default
Transfers the standard factory settings to the drive memory ("Def" column in the parameters table).
Menu PAR Description
4.18 590 Save par to keypad
Transfers the parameters currently stored in the drive and saves them in the keypad memory (See ADL300 Quick Start
manual, chapter 8.3.13).
Menu PAR Description
4.19 592 Load par from keypad
Transfers the parameters from the keypad memory to the drive (See ADL300 Quick Start manual, chapter 8.3.13).
Menu PAR Description
4.20 594 Keypad memory select
Selection of the area of the keypad memory to which to transfer and save the parameters stored in the drive.
Menu PAR Description
4.21 596 Save to SD card
Transfers the drive parameters to the SD memory card (See chapter 8.3.14 of the Quick start-up guide).
Menu PAR Description
4.22 598 Load from SD card
Transfers the parameters from the SD memory card to the drive (See chapter 8.3.14 of the Quick start-up guide).
Menu PAR Description
4.23 6100 Load synch control
Select the synchronous motor control mode. The drive is reset and restarts in the new control mode.
To perform this operation via keypad, see chapters 8.2.9 and 8.2.15 of the ADL 300 Quick Start Guide.
Note!
Important: the default parameters including the LIFT application are reloaded.
This can only be done with the drive disabled.
UM Type FB BIT
BIT
UM Type FB BIT
ENUM
UM Type FB BIT
BIT
UM Type FB BIT
BIT
UM Type FB BIT
BIT
UM Type FB BIT
UINT16
UM Type FB BIT
BIT
UM Type FB BIT
BIT
UM Type FB BIT
BIT
ADL300 • Functions description and parameters list
Def Min
0 0
Def Min
English 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
1 1
Def Min
0 0
Def Min
0 0
Def Min
0 0
Max Acc Mod
1 ERW FVS
Max Acc Mod
4 RWZ FVS
Max Acc Mod
1 RWZ FVS
Max Acc Mod
1 RW FVS
Max Acc Mod
1 RWZ FVS
Max Acc Mod
5 ERW FVS
Max Acc Mod
1 RW FVS
Max Acc Mod
1 RWZ FVS
Max Acc Mod
1 ERW FVS
17