gefran SIEIDrive ADL300 Functions Description And Parameters List page 103

Alarm
Bres ovld
InAir
PhLoss
Opt Bus
Mot PhLoss
Menu PAR Description
22.1 4500 Fault reset src
Selection of the origin (source) of the signal to be used for the command to reset the drive after an alarm. The terminal that
can be used for this function can be selected from among those listed in the "L_DIGSEL2" selection list.
Menu PAR Description
22.2 4502 ExtFlt src
Selection of the origin (source) of the signal to be used as the input for the drive external fault alarm ExtFlt. The terminal
that can be used for this function can be selected from among those listed in the "L_DIGSEL2" selection list.
Menu PAR Description
22.3 4504 ExtFlt activity
Setting of the behaviour of the drive in the event of an external fault alarm ExtFlt. This alarm indicates the intervention of a
drive external protection.
0 Ignore
1 Warning
2 Disable
3 Stop
4
Fast stop
Menu PAR Description
22.4 4506 ExtFlt restart
Enabling of automatic restart after the external fault alarm ExtFlt
0
Disable
1
Enable
Menu PAR Description
22.5 4508 ExtFlt restart time
Setting of the time within which the External Fault alarm must be reset in order to perform automatic restart.
Menu PAR Description
22.6 4510 ExtFlt holdoff
Setting of the delay between the signalling of the external fault alarm ExtFlt and enabling of the alarm. If an alarm condi-
tion occurs, the drive will wait for the set time before blocking is enabled. If the alarm is removed within the set time, the
drive will not indicate any alarm condition.
Menu PAR Description
22.7 4520 MotorOT src
Selection of the origin (source) of the signal to be used for the motor overtemperature alarm MotorOT. The terminal that
can be used for this function can be selected from among those listed in the "L_DIGSEL2" selection list".
Menu PAR Description
22.8 4522 MotorOT activity
Setting of the behaviour of the drive in case of a motor overtemperature alarm MotorOT. This alarm indicates that the mo-
tor temperature is too high.
0 Ignore
1 Warning
2 Disable
3 Stop
Ignore Warning
ü ü
ü ü
ü ü
ü ü
ü ü
UM Type FB BIT
LINK 16BIT
UM Type FB BIT
LINK 16BIT
UM Type FB BIT
ENUM
UM Type FB BIT
ENUM
UM Type FB BIT
ms UINT16
UM Type FB BIT
ms UINT16
UM Type FB BIT
LINK 16BIT
UM Type FB BIT
ENUM
ADL300 • Functions description and parameters list
Disable drive Stop
ü ü
ü ü
ü ü
ü ü
ü ü
Def Min
6000 0
Def Min
6000 0
Def Min
Disable 0
Def Min
Disable 0
Def Min
1000 120
Def Min
0 0
Def Min
6000 0
Def Min
Warning 0
Fast stop
ü
ü
ü
ü
ü
Max Acc Mod
16384 RW FVS
Max Acc Mod
16384 RW FVS
Max Acc Mod
4 RW FVS
Max Acc Mod
1 RW FVS
Max Acc Mod
30000 RW FVS
Max Acc Mod
10000 RW FVS
Max Acc Mod
16384 RW FVS
Max Acc Mod
4 RW FVS
103