Introduction; Information About This Manual; Drive Firmware / Application Version Cross Compatibility; Symbols Used In The Manual - gefran ADV200 Instruction Manual

1

Introduction

1.1 Information about this manual

This document describes the Flying Shear for Roll Forming machines software, supplementing what is
described in the ADV200 drive manual (for asynchronous and synchronous motors) and the optional boards
for encoder acquisition and input expansion.

1.2 Drive Firmware / Application version Cross compatibility

Flying Shear for Roll Forming machines Application

1.3 Symbols used in the manual

Indicates a procedure, condition, or statement that, if not strictly observed, could result in personal
injury or death.
Indicates a procedure, condition, or statement that, if not strictly observed, could result in damage to
or destruction of equipment.
The following operations require the machine in motion.
Unforeseen machine movement is always possible. Take this into account and take the necessary
precautions.
Indicates that the presence of electrostatic discharge could damage the appliance.
When handling the boards, always wear a grounded bracelet.
Indicates a procedure, condition, or statement that should be strictly followed in order to optimize
these applications.
Note ! Indicates an essential or important procedure, condition, or statement.
Flying Shear for Roll Forming machines – Instruction manual
1.x.1
ADV200 Firmware
7.5.16 and higher
Pag. 5 / 29