Introduction; Compatibility Application Version / Drive Firmware - gefran ADV200 User Manual

1 Introduction

This manual contains all the information necessary for the design, wiring and configuration of a system
based on the Electrical Line Shaft application for the ADV200.
Chapter 2 - "General description" provides information about system characteristics and functions.
Chapter 3 - "Connection diagrams and system interface" illustrates typical connection diagrams and the
command interface for controlling the application via digital I/O or fieldbus.
Chapter 4 - "Commissioning" provides information about installing the application on the ADV200 drive.
Chapter 5 - "Control logic and sequences" contains detailed information about application functions and
operating modes.
Chapter 6 - "List of Parameters" contains the complete list of system parameters with a description of their
functions.
Chapter 7 - "Examples" contains a gear ratio calculation example and some guidelines for startup, tuning
and performance check of the application.

1.1 Compatibility Application version / Drive firmware

ELS Drive Firmware
1.0.32 6.X.X ; 7.X.X
____________________ _
User Guide Electrical Line Shaft for ADV200 Page 4 of 32